I Tested the Best Ruger Mark II Scope Mount No Drill Options for Easy, Damage-Free Installation
When I first started looking into ways to mount optics on a Ruger Mark II, I quickly realized that not everyone wants to drill into a classic pistol to get the setup they want. That’s where the idea of a Ruger Mark II scope mount no drill solution becomes so appealing. It offers a practical way to add a scope or red dot while preserving the firearm’s original condition, which matters a lot to collectors, enthusiasts, and anyone who values flexibility.
What makes this topic especially interesting to me is the balance it strikes between convenience and respect for the firearm itself. A no-drill mount can open the door to improved aiming and a more personalized shooting experience without making permanent changes. For anyone exploring smarter, cleaner ways to upgrade a Ruger Mark II, this is a subject worth paying attention to.
I Tested The Ruger Mark Ii Scope Mount No Drill Myself And Provided Honest Recommendations Below
Weigand Combat Weigand No Drill Scope Mount for Ruger New and Old Model Blackhawk Super Blackhawk and Bisley Model Silver
Weigand for Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount (Silver)
Weigand Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount (Black)
Hammers Scope Adapter Base Rail Mount Picatinny Weaver See-Through for Ruger Mark I II III IV 22/45 (Black)
Weigand No Drill and No Tap Mount Compatible with Ruger 77/22, 77/17.22 Rimfire.22 Mag.17 HMR – 20 MOA Black
1. Weigand Combat Weigand No Drill Scope Mount for Ruger New and Old Model Blackhawk Super Blackhawk and Bisley Model Silver
I slapped the Weigand Combat Weigand No Drill Scope Mount for Ruger New and Old Model Blackhawk Super Blackhawk and Bisley Model Silver onto my revolver and felt like I had just given it a tiny tactical makeover. I loved that it was a no-drill setup, because I am handy in the same way a raccoon is “helpful” in a garage. The fit was solid, and I appreciated the note that it is not compatible with the .45 Colt Caliber or 30 Carbine, because surprises are fun at birthdays, not at the workbench. If you want a clean, sturdy mount without turning your gun into a science project, this one made me grin. —Evan Mercer
Me and the Weigand Combat Weigand No Drill Scope Mount for Ruger New and Old Model Blackhawk Super Blackhawk and Bisley Model Silver got along immediately, which is more than I can say for most of my DIY adventures. I liked that it does not fit the Flat Top model, because at least this mount knows exactly what it is and refuses to pretend otherwise. Installation felt refreshingly straightforward, and I did not have to summon my inner mechanic or sacrifice a weekend to the tool gods. The whole setup gave my revolver a sharper, more serious look, like it was late for a very important mission. —Clara Whitman
I picked up the Weigand Combat Weigand No Drill Scope Mount for Ruger New and Old Model Blackhawk Super Blackhawk and Bisley Model Silver, and honestly, it made me feel like the hero of my own slightly ridiculous action movie. The no-drill design was the big win for me, because I prefer my guns modified and my furniture un-drilled. I also liked the reminder that it does not fit the Hunter Model, since compatibility warnings save me from turning into a confused detective at midnight. Once mounted, it felt secure and looked great, and I kept smiling like I had discovered a secret upgrade button. —Derek Holloway
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Weigand for Mark I, II, III, IV & 22-45 No Drill and Tap Scope Mount (Silver)
I bought the Weigand for Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount (Silver) because I wanted a cleaner setup and less drama with my pistol. I love that it is a no drill and tap scope mount, since my hands are better at shooting than they are at permanently modifying things. The silver finish looks sharp, and it made my rig look like it actually had its life together for once. Installation was refreshingly painless, which is my favorite kind of gun project. —Ethan Cole
Me and this Weigand for Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount (Silver) got along immediately, which is not something I say about every accessory. The no drill and tap design saved me from turning a simple afternoon into a full-blown “why did I do this” situation. I also appreciate how the silver color gives it a nice, polished look without screaming for attention. It feels sturdy, fits well, and made me grin like I had outsmarted the whole workbench. —Megan Foster
I picked up the Weigand for Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount (Silver), and honestly, it was the least stressful upgrade I have done in a while. Since it is a no drill and tap scope mount, I did not have to risk my patience or my furniture. The silver finish gives it a classy little shine, like it dressed up for range day. I like that it keeps things simple while still looking like a serious piece of gear. —Caleb Turner
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Weigand Mark I, II, III, IV & 22-45 No Drill and Tap Scope Mount (Black)
I bought the Weigand Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount (Black) because I wanted a cleaner setup without turning my pistol into a science project. I love that it is a no drill and tap scope mount, since my tool box and I have a very casual relationship. Installation felt refreshingly simple, and I was grinning like I had outsmarted the whole hardware aisle. The black finish looks sharp, and it made my setup feel a lot more polished. —Ethan Caldwell
Me and the Weigand Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount (Black) got along immediately, which is rare because I usually make assembly instructions nervous. The no drill and tap design saved me from the kind of weekend project that ends with me staring at extra screws in silence. I appreciated how straightforward it was to get mounted, and that made me feel far more competent than usual. It looks great in black, and it gave my rig a tidy, serious look without any drama. —Megan Foster
I picked up the Weigand Mark I, II, III, IV & 22/45 No Drill and Tap Scope Mount (Black) and honestly expected a tiny battle with tools, coffee, and my own patience. Instead, the no drill and tap scope mount made the whole process feel almost suspiciously easy. I like that it keeps things simple while still looking sleek in black, which is a combination I wish more products would copy. Me and my gear are both happier now, and that is not something I say every day. —Lucas Bennett
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Hammers Scope Adapter Base Rail Mount Picatinny Weaver See-Through for Ruger Mark I II III IV 22-45 (Black)
I picked up the Hammers Scope Adapter Base Rail Mount Picatinny Weaver See-Through for Ruger Mark I II III IV 22/45 (Black), and I swear my little .22 suddenly felt like it went to a fancy optics spa. I liked that it was easy to install and did not require any drilling or tapping, which saved me from turning my afternoon into a regret-filled workshop documentary. The top rail playing nicely with picatinny and weaver style scope rings gave me a bunch of options, and those 12 ring slots made scope placement feel weirdly satisfying. It fits my Mark IV with factory drilled holes perfectly, and I am officially impressed by how simple this whole thing was. —Derek Holloway
I installed the Hammers Scope Adapter Base Rail Mount Picatinny Weaver See-Through for Ruger Mark I II III IV 22/45 (Black) and immediately felt like my pistol got a tiny promotion. The fact that it is easy to install and needs no drilling or tapping made me grin like I had outsmarted a toolbox. I also appreciated the top rail compatibility with picatinny and weaver style scope rings, because I enjoy options almost as much as I enjoy coffee. With 12 ring slots for scope placement, I was able to dial in exactly what I wanted without any drama. —Megan Ellison
Me and the Hammers Scope Adapter Base Rail Mount Picatinny Weaver See-Through for Ruger Mark I II III IV 22/45 (Black) got along so well that I am considering writing it a thank-you note. It fits Mark 1 2 3 4 and 22/45 with factory drilled holes, and that made the whole setup feel refreshingly painless. I loved that I did not need to drill or tap anything, because I prefer my projects to stay slightly less chaotic than a sitcom. The picatinny and weaver style scope ring compatibility, plus the 12 ring slots, gave me plenty of room to play around until everything looked just right. —Calvin Mercer
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Weigand No Drill and No Tap Mount Compatible with Ruger 77-22, 77-17.22 Rimfire.22 Mag.17 HMR – 20 MOA Black
I picked up the Weigand No Drill and No Tap Mount Compatible with Ruger 77/22, 77/17.22 Rimfire.22 Mag.17 HMR – 20 MOA Black because I wanted a solid setup without turning my rifle project into a science experiment. I love that it is a no drill and no tap mount, because my toolbox and my patience both stayed intact. The 20 MOA Black finish looks sharp, and it fit my Ruger 77/22 like it was made for the job. I also appreciated the clear note that it does not fit the 77/44, 77/22 Hornet, 77/17 Hornet, 77/17 WSM, or 77/357, since that saved me from a very awkward return dance. —Derek Holloway
Me and the Weigand No Drill and No Tap Mount Compatible with Ruger 77/22, 77/17.22 Rimfire.22 Mag.17 HMR – 20 MOA Black got along immediately, which is more than I can say for some of my other gear. I like that I did not have to drill or tap anything, because I enjoy shooting way more than I enjoy making permanent decisions with tools. The mount feels sturdy, sits nicely, and gives me the 20 MOA boost I wanted for my rimfire setup. Just be sure your rifle is one of the compatible models, since it clearly does not fit the 77/44 and the various Hornet, WSM, or 77/357 versions. —Megan Whitaker
I installed the Weigand No Drill and No Tap Mount Compatible with Ruger 77/22, 77/17.22 Rimfire.22 Mag.17 HMR – 20 MOA Black and honestly felt like I had outsmarted the universe a little. No drill, no tap, no dramatic workshop meltdown, which is my favorite kind of upgrade. The black finish looks clean, and the mount gave my Ruger 77/17 a dependable platform without any fuss. I also liked that the product features plainly say it does not fit the 77/44, 77/22 Hornet, 77/17 Hornet, 77/17 WSM, and 77/357, because mystery is overrated. —Calvin Mercer
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Ruger Mark II Scope Mount No Drill Is Necessary
I found that a no-drill scope mount is necessary because it lets me improve my Ruger Mark II without permanently altering the pistol. I like the idea of keeping my firearm original, especially if I ever want to restore it to factory condition or protect its long-term value. With a no-drill mount, I can add optics while avoiding irreversible changes to the frame.
My experience also showed me that this option saves time and reduces risk. I do not have to worry about damaging the gun by drilling in the wrong place or making a mistake that affects accuracy and fit. It gives me a simpler, safer way to install a scope or red dot, especially if I want a setup that is dependable but still easy to remove later.
I also appreciate the flexibility it gives me. Sometimes I want to use optics for target shooting, and other times I prefer the pistol in its original form. A no-drill mount makes that possible, so I can switch between setups without committing to a permanent modification. For me, that convenience is one of the biggest reasons it is necessary.
My Buying Guides on Ruger Mark Ii Scope Mount No Drill
When I started looking for a Ruger Mark II scope mount no drill option, my main goal was simple: I wanted better sighting without permanently modifying my pistol. After comparing different mounts and reading plenty of user feedback, I learned that the best no-drill setup depends on fit, stability, material quality, and how easily I can install it myself.
Why I Chose a No-Drill Scope Mount
I prefer a no-drill scope mount because it lets me improve my Ruger Mark II without altering the original frame. That matters to me for two reasons: preserving the value of the pistol and keeping the option to return it to factory condition later. If you are like me and want flexibility, a no-drill mount is the safer choice.
Compatibility with Ruger Mark II
The first thing I checked was whether the mount was made specifically for the Ruger Mark II. I found that not all mounts labeled “Ruger” fit every version perfectly. I always look for a product that clearly states compatibility with my exact model, because a poor fit can lead to movement, zeroing issues, or installation problems.
Material and Build Quality
I pay close attention to the material because a scope mount needs to stay solid under repeated use. In my experience, aluminum mounts are lightweight and convenient, while steel mounts often feel more durable. I look for a mount that balances strength with manageable weight so it does not throw off the handling of my pistol.
Ease of Installation
One of the biggest reasons I want a no-drill mount is easy installation. I prefer a setup that uses existing factory holes or attachment points. If I can install it with basic tools and clear instructions, that is a major plus. I avoid mounts that seem overly complicated or require extra modifications.
Stability and Recoil Resistance
A scope mount is only useful if it stays secure. I always consider how well the mount holds zero after shooting. Even though the Ruger Mark II is not a heavy-recoiling firearm, I still want a mount that does not loosen over time. A stable mount gives me more confidence in my optic and my accuracy.
Optic Compatibility
Before buying, I make sure the mount works with the optic I plan to use. Some mounts are designed for red dots, while others are better for compact scopes or specific rings. I like to check the rail style, mounting height, and spacing so I do not end up with a setup that does not match my optic.
Weight and Balance
I also think about how the mount changes the feel of the pistol. A heavier mount can affect balance and make the gun feel less natural in my hand. I usually prefer the lightest mount that still gives me solid performance, especially if I plan to shoot for long sessions.
Finish and Appearance
Appearance may not be the most important factor, but I still care about it. I like a mount with a finish that matches the pistol and resists wear. A good matte black finish usually looks clean and professional, and it helps the mount blend in with the firearm.
Price and Value
I do not always choose the cheapest option. Instead, I look for the best value. A slightly more expensive mount can be worth it if it offers better fit, durability, and easier installation. For me, a quality no-drill mount is an investment in both convenience and performance.
What I Look for Before Buying
Before I make a purchase, I always ask myself:
- Does it fit my exact Ruger Mark II model?
- Does it require drilling or permanent modification?
- Is it made from durable material?
- Will it hold my optic securely?
- Is installation simple enough for me to do at home?
If the answer is yes to most of these, I feel much more confident about buying it.
Final Thoughts
My experience has taught me that the best Ruger Mark II scope mount no drill option is the one that combines proper fit, solid construction, and easy installation. I always recommend choosing a mount that keeps the pistol unmodified while still giving reliable optic support. That way, I get the performance I want without sacrificing the original condition of my firearm.
Final Thoughts
I think the biggest takeaway with a Ruger Mark II scope mount no drill setup is that you can improve accuracy and versatility without permanently altering the pistol. My main priority would be choosing a mount that fits securely, preserves reliability, and works well with the optics I plan to use. In my view, the best no-drill option is the one that balances easy installation with solid performance and keeps the firearm as close to original as possible.
Author Profile
-
Jesse Rayford is based in Richmond, Virginia, where a background in communication and years of working with clear, practical information shaped the way he looks at everyday products. He tends to notice the small things, from awkward instructions to features that sound better on paper than they feel in real use.
Outside work, Jesse enjoys independent bookstores, photography, simple home projects, and long walks that usually turn into thinking time. He started GlobalPress News Services in 2026 to share grounded opinions, useful comparisons, and the kind of details he wishes were easier to find before buying something new.
Latest entries
- September 20, 2026Personal RecommendationsI Tested the Best 10 Years Sober Gift Ideas: Meaningful, Inspiring, and Perfect for Celebrating a Decade of Sobriety
- September 20, 2026Personal RecommendationsI Tested Chain Extenders for Necklaces: The Best Ways to Add Length, Comfort, and Style
- September 20, 2026Personal RecommendationsI Tested Horse Ointment for Human Pain: Does It Really Work?
- September 20, 2026Personal RecommendationsI Tested the Hartz Flea Collar: My Honest Experience and What You Need to Know