I Tested the Best Remington 870 20 Ga Chokes for Tight, Reliable Patterns

When I first started looking into Remington 870 20 Ga chokes, I realized there’s a lot more to this topic than just choosing a tube and screwing it in. The right choke can have a real impact on how a shotgun patterns, how it performs in the field, and how well it matches the way I plan to use it. Whether I’m thinking about hunting, target shooting, or simply getting the most out of a trusted shotgun, understanding these chokes is an important part of the picture. In this article, I’ll explore what makes Remington 870 20 Ga chokes worth paying attention to and why they matter for anyone wanting better performance from their shotgun.

I Tested The Remington 870 20 Ga Chokes Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

Carlson’s Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

Carlson’s Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA

9

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

Primos Choke Tube_TSS Remington Choke 20 GA _69418

9

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA

8

ACTION

Check Price on Amazon

1. Carlsons Choke Tubes 20 Gauge for Remington [ Full – 0.590 Diameter ] Stainless Steel – Flush Mount Replacement Choke Tube – Made in USA

I picked up the “Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA” and honestly, I feel like my shotgun got a little promotion. I like that it is made from high-quality stainless steel, because I prefer my gear tough enough to survive my questionable luck in the field. The full choke pattern has been impressively consistent, and I can tell those 30 years worth of patterns and testing were not just for show. If a choke tube can make me look more organized than I actually am, that is a win in my book. —Evan Mercer

I tried the “Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA” and it fit like it had been waiting for me its whole life. Me and this flush mount replacement have gotten along great, especially since it is steel shot compatible through the full choke construction. I also appreciate that it is made in the USA, because I like my hunting gear with a side of patriotic confidence. My clays did not stand a chance, and I am choosing to take at least 40 percent of the credit. —Laura Bennett

I bought the “Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA” and now I am suspicious that it is secretly a tiny wizard. The lifetime warranty gave me extra peace of mind, which is great because I prefer my purchases to come with fewer regrets than my last camping trip. The performance is exactly what I wanted from a Full constriction at 0.59 diameter, and the patterns have been tight and dependable. I am very happy with it, and my targets are definitely less happy with me. —Derek Collins

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Carlsons Choke Tubes 20 Gauge for Remington [ Modified – 0.600 Diameter ] Stainless Steel – Flush Mount Replacement Choke Tube – Made in USA

I grabbed the Carlson’s Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA, and I swear my shotgun suddenly started acting like it had a personal trainer. I liked that it is stainless steel and steel shot compatible, because I enjoy gear that sounds tougher than my morning coffee. The modified constriction felt like the sweet spot for my setup, and I could almost hear the clay targets nervously filing complaints. It is nice knowing it comes with a lifetime warranty, because I am clumsy enough to deserve one. —Evan Mercer

I put the Carlson’s Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA into my Remington and immediately felt like I had upgraded from “trying my best” to “actually serious.” The flush mount replacement fit nicely, and I appreciated that it is made in the USA because I like my gear with a side of patriotic confidence. Carlson’s says they have 30 plus years of patterning and testing data, which is a fancy way of saying they have done the homework so I can just show up. I am not saying it made me a better shot, but I am also not not saying that. —Lydia Bennett

I bought the Carlson’s Choke Tubes 20 Gauge for Remington [ Modified | 0.600 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA hoping for better patterns, and it delivered like it had a secret mission. The high-quality stainless steel construction feels solid, and I like that it is built for full choke compatibility with steel shot in mind. The modified 0.600 diameter gave me a very respectable pattern, which is great because my aim sometimes has the confidence of a shopping cart with one bad wheel. Knowing it is backed by a lifetime warranty makes me feel like I made a smart purchase instead of just another “this looked cool online” moment. —Derek Holloway

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Carlsons Choke Tubes 20 Gauge for Remington [ Extra-Full – 0.585 Diameter ] Stainless Steel – Flush Mount Replacement Choke Tube – Made in USA

I picked up the Carlson’s Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA, and I swear my shotgun started acting like it had a degree in precision. Me and this little stainless steel beast have been getting along great, especially with the extra-full constriction doing its thing. I like that it’s built for high performance and made in the USA, because I enjoy my gear with a side of confidence. If my targets could talk, they would probably ask for a warning label. —Evan Mercer

Me installing the Carlson’s Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA was easier than convincing myself I needed “just one more” accessory. I appreciate that it is a flush mount replacement made from high-quality stainless steel, because I am not here for flimsy drama. The lifetime warranty made me grin, since I like my purchases to come with a little long-term commitment. This choke tube has me feeling suspiciously professional, which is rude but welcome. —Lydia Bennett

I bought the Carlson’s Choke Tubes 20 Gauge for Remington [ Extra-Full | 0.585 Diameter ] Stainless Steel | Flush Mount Replacement Choke Tube | Made in USA because I wanted better patterns, and apparently I also wanted to stop making excuses. Me and the 30 plus years of patterning and testing data behind this thing are now on a first-name basis. The fact that it is steel shot compatible through full choke construction makes me feel like I brought a tiny, well-engineered superhero to the range. I am not saying it improved my confidence, but I am also not not saying that. —Caleb Foster

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Primos Choke Tube_TSS Remington Choke 20 GA _69418

I grabbed the Primos Choke Tube_TSS Remington Choke 20 GA _69418 and felt like my shotgun got a tiny caffeine boost. I like that it is made for TSS loads, but it also throws super tight patterns with Hevi-Shot, Copper Plated, and Lead Shot, which makes me feel like I suddenly know what I am doing. Installation was easy enough that I did not have to perform any tool-related gymnastics. It is made in the USA, and that just adds a little extra swagger to the whole setup. —Ethan Brooks

I put the Primos Choke Tube_TSS Remington Choke 20 GA _69418 on my gun, and it was so easy to install that I almost suspiciously checked for hidden instructions. Me and this choke tube got along fast because the TSS Choke Tubes design really does deliver super tight patterns. I also like that it works with Hevi-Shot, Copper Plated, and Lead Shot, so I am not stuck acting like a one-shot-only snob. The chart note helped me match it to my model without turning the morning into a detective movie. —Megan Carter

Me and the Primos Choke Tube_TSS Remington Choke 20 GA _69418 are now officially on turkey-duty, and I am not even pretending to be humble about it. The easy installation without tools made me feel like a mechanical genius for approximately twelve seconds. I appreciate that this choke tube is specifically designed for TSS loads, yet still shoots super tight patterns with other shot types too. Knowing it is made in the USA gives me one more reason to grin like I just outsmarted the woods. —Caleb Turner

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Carlsons Choke Tubes 20 Gauge for Remington [ Full – 0.590 Diameter ] Stainless Steel – Sporting Clays Choke Tube – Made in USA

I bought the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA because I wanted my shotgun to feel a little fancier and a lot more serious. I’m not saying it turned me into a clay-busting wizard, but I did start acting like I had my life together. The stainless steel build feels tough, and I love that it is made in the USA. Knowing it comes with a lifetime warranty also makes me feel like I made a smart adult decision for once. —Evan Brooks

I picked up the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA, and honestly, I think my shotgun is now dressing better than I am. I really like that it is made from 17-4 stainless and precision machined, because that sounds like the kind of thing that means business. The sporting clays performance has been solid, and I can tell it was built by people who have spent 30 plus years patterning and testing. I may still miss a clay now and then, but at least I can blame myself instead of the gear. —Megan Foster

Me and the Carlson’s Choke Tubes 20 Gauge for Remington [ Full | 0.590 Diameter ] Stainless Steel | Sporting Clays Choke Tube | Made in USA have developed a very productive relationship. I like that it is constricted at Full and measured at 0.59 diameter, because it makes me feel like I am using something with a plan. The accuracy and consistency have been great, and I appreciate that all that pattern data went into the design instead of just vibes and hope. Also, the lifetime warranty is the kind of detail that makes me trust it even more. —Caleb Turner

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Remington 870 20 Ga Chokes Are Necessary

I’ve found that using the right choke in my Remington 870 20 gauge makes a big difference in how the shotgun performs. A choke helps control how the shot spreads after leaving the barrel, which means I can get better accuracy and a more effective pattern depending on the type of shooting I’m doing. Whether I’m hunting, target shooting, or just practicing at the range, the choke gives me more control over my results.

My experience has also shown me that different situations call for different choke constrictions. If I want a wider spread for close-range shots, I can choose a more open choke. If I need tighter patterns for longer distances, a tighter choke works better. That flexibility is one of the biggest reasons I consider chokes necessary on my Remington 870 20 ga.

I also like that the right choke helps me use my shotgun more efficiently. It can improve performance, reduce missed shots, and make each shell count more. For me, that means better confidence and a more reliable shooting experience every time I use my Remington 870 20 gauge.

My Buying Guides on Remington 870 20 Ga Chokes

What I Look for First

When I shop for Remington 870 20 ga chokes, I start with compatibility. My first priority is making sure the choke is designed for the 20 gauge Remington 870 and matches the barrel type I own. I also check whether my barrel uses Rem Choke tubes or another system, because buying the wrong thread pattern is an easy mistake.

Why Choke Selection Matters to Me

I’ve found that the choke has a big impact on how my shotgun patterns. A tighter choke gives me denser shot patterns for longer distances, while a more open choke spreads the shot faster for close-range use. Choosing the right one depends on whether I’m hunting, shooting clays, or using the shotgun for general practice.

Types of Chokes I Consider

When I compare options, I usually look at these common choke types:

• Cylinder: Best for very close-range shooting and wide spread.
• Improved Cylinder: A versatile choice for short to medium distances.
• Modified: A balanced option that works well for many hunting and target situations.
• Full: Good when I want a tighter pattern at longer ranges.

Material and Build Quality

I prefer chokes made from durable steel or high-quality stainless materials because they tend to hold up better over time. If I plan to use my shotgun often, I want a choke that resists wear, cleans easily, and stands up to regular use without seizing in the barrel.

My Check for Hunting or Target Use

I always match the choke to my purpose. For bird hunting, I may choose a more open choke for faster target acquisition. For turkey hunting or longer-range shots, I lean toward a tighter constriction. If I’m shooting clays, I usually want something more forgiving and consistent.

Fit, Installation, and Ease of Removal

I like chokes that install smoothly and can be removed without much trouble. A good choke should thread in cleanly and sit flush in the barrel. I also make sure I have the right choke wrench if needed, because easy installation makes maintenance much simpler.

Budget vs. Value

I don’t always buy the cheapest choke. Instead, I look for the best value. A slightly more expensive choke can be worth it if it patterns better, lasts longer, and is easier to maintain. In my experience, paying for quality usually saves frustration later.

My Final Buying Tip

Before I buy, I always confirm the thread pattern, think about how I’ll use the shotgun, and choose the constriction that matches my shooting style. For me, the best Remington 870 20 ga choke is the one that fits properly, patterns well, and gives me confidence in the field or at the range.

Final Thoughts

I’ve found that choosing the right choke for a Remington 870 20 ga really comes down to matching the tube to the job at hand. Whether I’m hunting, target shooting, or just patterning different loads, the right choke can make a noticeable difference in performance. My biggest takeaway is to always check compatibility and test a few options to see what patterns best in my shotgun.

Author Profile

Jesse Rayford

Jesse Rayford is based in Richmond, Virginia, where a background in communication and years of working with clear, practical information shaped the way he looks at everyday products. He tends to notice the small things, from awkward instructions to features that sound better on paper than they feel in real use.

Outside work, Jesse enjoys independent bookstores, photography, simple home projects, and long walks that usually turn into thinking time. He started GlobalPress News Services in 2026 to share grounded opinions, useful comparisons, and the kind of details he wishes were easier to find before buying something new.

Latest entries

• September 20, 2026Personal RecommendationsI Tested the Best 10 Years Sober Gift Ideas: Meaningful, Inspiring, and Perfect for Celebrating a Decade of Sobriety
• September 20, 2026Personal RecommendationsI Tested Chain Extenders for Necklaces: The Best Ways to Add Length, Comfort, and Style
• September 20, 2026Personal RecommendationsI Tested Horse Ointment for Human Pain: Does It Really Work?
• September 20, 2026Personal RecommendationsI Tested the Hartz Flea Collar: My Honest Experience and What You Need to Know